Comprehensive analysis of the structural composition of the feeder

Feeder feeding by the guide sleeve rotatable disc and the scraper and other structural components. The material within the hopper through the guide sleeve material deposited on

the disc with wear-resistant liner , with the carousel Vibration feeder the material to be scraped by the scraper , scraper position or adjust the level of material guide sleeve can be

changed feeding amount . Round

Disc diameter generally less than 3m , speed does not exceed 10 rev / min .
Disc feeder smooth and reliable operation , low energy consumption , more convenient to adjust the Coal vibrating screen amount , but the structure is relatively bulky , for viscous smaller

powder granular materials .
Some of the feeder from the housing and impeller components. Casing, the bottom of the inlet and outlet ports , respectively, and silos, by feeding equipment connections.

Impeller rotates about a horizontal axis impeller material falling into the cavity between the cells , with the impeller rotation by a half weeks after discharge into the

feeding equipment . Equalizing pipe can enter the feed zone before

Hyperbaric chamber cell vent to prevent the feeding area can not feed . Impeller speed can be adjusted to change the quantity . 500mm impeller diameter generally less speed does

not exceed 45 rev / min . This feeder structure is relatively simple , light weight, small size, good sealing when feeding for powder

Or granular materials.