Micro electromagnetic vibrating feeder use vibrator eccentric centrifugal force generated by rotation

         Micro electromagnetic vibrating feeder to go through the material weight by weighing bridge for testing to determine the weight of the material on the tape, mounted in

the tail of the digital sand screen speed sensor, continuous measurement of the running speed of the feeder, the speed sensor pulse output proportional to the disc feed

Feeder speed, the speed and weight of the signal with the signal fed into a single screw feeder controller, a microprocessor for processing, generating and displaying the

cumulative amount / instantaneous flow. The flow rate is compared with the set flow rate, controlled by the output signal of the inverter control instrumentation change in board

Feeder drive speed, so that the material on the feeder traffic changes, close to and maintained at the set feed flow, enabling dosing requirements.
   Micro electromagnetic vibrating feeder is the use of vibrator eccentric rotation of the centrifugal force, so sieve compartment, movable parts such as vibrators forced

continuous circle or approximately circular movement. Material is in the car with the sieve linear vibrating screen surface inclined to make continuous throwing motion, evenly and continuously

Materials sent to disc feeder mouth. When the plate moves forward together with the material, the material within the hopper along with the body of the space filled. When

backward movement of the base plate, the base material can not be on the back and along the unloading blocked, to achieve the feed. Change Backplane movement amplitude,

frequency and the

Height adjustable feed gate feeding amount. Feeding amount is generally 40 tons / hour or less. Such single-screw feeder suitable for medium and small size materials, mainly

trough and tilting two kinds. In the feeder base plate is flat, the work reciprocated. Tilting bottom feeder-arc

Shaped, hinged on the body, the work floor swing.