Feeder works: vibrating feeder is the use of a vibrator in the eccentric rotation of the centrifugal force , so sieve hand, vibrators and other moving parts for the compulsory
round or nearly continuous circular Semi-mobile crushing plant movement. Materials in the car with the sieve sieve surface tilted for continuous throwing motion and are continuously
Evenly the material sent by the spout .
Feeder can be massive, granular materials from silos in uniform , continuous feed to the affected device . In the sand and gravel production line can feed the crusher
continuously complete crushing plant and uniformly to avoid the crusher discharge port by clogging . Feeder Uses: Widely used in mining, gravel field , metallurgy,
Building materials, chemical, mineral , coal and other industries crushing and screening production lines.
Vibrating Feeder Features: The machine structure is simple , stable vibration, feeding uniform, continuous good performance, exciting force is adjustable ; subject to change and
control the flow , easy to operate ; eccentric block vibration source, low noise , low power consumption less regulation performance , no red material phenomenon ; If using seal
Closed body to prevent dust pollution .
Feeder simple structure, easy operation, no run , small- power consumption ; evenly adjust to the amount of ore ; therefore has been widely used . Feeder is generally used for
loose material . According equipment performance requirements, configuration should be designed to minimize the material on the tank
Pressure , but also by the manufacturer requirements, effective Bunker discharge port shall not exceed one-quarter width of the material flow rate control in 6-18m/min. Feeding
capacity of greater material silo bottom row Part of the bar should be set high enough ore plate ; does not affect the performance of the feeder , stopped
Mine plate fixed on the tank should not . To enable a smooth discharge hopper , silo best designed rear wall inclination 55-65 degrees.
没有评论:
发表评论