Airflow sieve mesh machine itself, maintenance and use of

( A ) airflow mesh sieve start and stop with the installation
1 air screen baghouse dust collection bag should be promptly jitter, typically once per hour slap or shake .
2 flow sifter unit operation start-up plate feeder sequence : induced draft fan ; air screen
3 air screening machine downtime order: air screen ; suction fan ;
4 installed to the correct airflow mesh sieve , air mesh sieve into a cylindrical installed on the screen , the lower ends of the rope fixed screen with 810 adhesive lap joints

bonded lap width Belt feeder diameter 30 -50 mm, fixed at both ends of the rope , fastened side edge alignment screen, so the screen does not

Distorted, do not discount , uniform tension , with a network test screen , the first feed rate adjustment is small, gradually increasing feed rate .
(B ) maintenance and repair air screen
Requirements according to product flow sieve operator manual , the proper use of equipment, do cleaning , lubricating , tightening and anti-corrosion equipment and other routine

maintenance work, the installations are kept clean inside and outside , good performance, safe and reliable condition.
1 host , motors and fans overhaul once a year , on the host , there is oil under the bearing hole , add oil to be on time , remove the motor in the dust.
2 Replace the airflow mesh sieve to follow the requirements of the first part of the operation , to ensure uniform tension , fixed at both ends of the rope , while tightening

while adjusting screen .