Vibration sieve Maintenance and Troubleshooting

Maintenance
First, the need for regular inspection vibration sieve sieve surfaces for damage , if there is need for timely replacement of damaged , avoid product screening failed.
Two , vibration sieve spring stone screening machine member to check whether there is loose , if there is need to tighten with a wrench loose in order to achieve a better screening effect .
Third, check the rotary vibration sieve screen frame of the V -ring for damage , if there is need for timely repair damage , prevent material leakage.
Fourth, check the motor vibration sieve , at the mouth periodically from the butter butter filling .
Troubleshooting
Vibration sieve hammer down adjustment method :
1 to change the phase angle of the upper Circular vibrating screen and lower weight , can change the trajectory of the sieve material and residence time . The screening machine is required to adapt to a

variety of materials separated state , such as material distribution , capacity , separation efficiency over the net rate variations , it should be adjusted to the optimum

condition.
2 rotary vibration sieve hammer can not adjust the angle , turn the bottom barrel adjustment hole , loosen the bolts under the hammer , depending on the trajectory of screening

material to the discharge port opposite direction to adjust the phase angle of the upper and lower weight ( see figure below ) . Then a small amount of material on the screen

above the sieve machine running , do the screen surface materials trajectory checks, such as processing parameters to achieve the best effect , stop and tighten bolts to adjust

on the end ( remember to tighten the mounting bolts ) .
Note : Sometimes due to the proportion of materials , humidity , stacking tilt angle and other parameters to adjust the phase angle was not possible to adjust successfully , so

please do not be impatient users to adjust the screen machine play its high efficiency.
3 Additional weight adjustments. In the bottom of a hammer with additional weights measured , and its role is to increase the screening machine excitation force , according to

the user 's screen machine layers of different materials to increase or decrease the proportion of the exciting force , increase or decrease the number of additional weights

screening machine can make the best screening effect .