Cone Crusher Working Principle

Cone crusher crushing effect is basically the same with the gyratory coal crusher machine. Also using movable cone and fixed cone to carry crushed between the mine face. Dynamic cone

supported on spherical bearings, and fixed in a hanging vertical axis, the vertical axis is placed eccentric sleeve, and the eccentric sleeve and placed on the thrust bearing.

Moving along the vertical axis of the cone and driven by the eccentric sleeve, eccentric bushing by a horizontal axis and by the bevel gear and pulley to drive. By the motor

through V-belt pulley drive. The lower part of the vertical axis into the eccentric sleeve, when the eccentric sleeve is rotated to draw a conical surface axis. So moving cone

fixed cone near incurs when crushed ore. The upper and lower casing of two parts, connected by bolts. The bolt sleeve has a strong spring action of the spring is when the metal

or other hard objects falling into the crushing chamber, the crusher without damage (such as spindle, etc.). If you have slug or other hard objects (nuts, brazing top) along

with the ore into the crushing chamber, it is not moving cone is lifted, increasing the discharge mouth may be discharged. Sometimes hydraulic cone crusher is the use (or

pressure) device to adjust the size of the port of discharge.

Ore from the mine mouth to fall into the machine through the distribution plate, distribution panel mounted on the vertical axis side, because the vertical axis of rotation, and

access to the vibration, the ore evenly distributed in the cone four weeks. With hinge rod with handle and hinges, so that does not move up or down cone to adjust the width of

the port of discharge. The components are manufactured using steel, moving cone and fixed cone face inlaid with manganese steel liner to protect the cone from wear and tear,

worn liner can be replaced, replacement, poured melted between the liner and cone Lead close adhesion between them.

Crushing cone crusher, also known as short head cone crusher, or called "circular grinding." It is with the cone crusher structure is basically the same, the only difference is

the dynamic cone and fixed cone shapes are different. Short head cone crusher movable cone and fixed cone is relatively short, and the parallel between the two cones with

relatively long, to the mine mouth and discharge mouth is relatively small, so you can get smaller products (5-10 mm) .

In addition to the standard type and short head type cone crusher, there are interposed between the two called medium-sized cone crusher, can also be used for medium crushing

crushing. Standard, medium and short head cone crusher is the main difference between the cross-sectional shape of the different crushing chamber. Therefore, the row of ore feed

size and particle size are also different.

Gyratory crusher for primary crushing, standard mobile screening plant ore crushing machine is used in the short head type cone crusher for crushing. , The crushing cone crusher

specifications using dynamic cone bottom diameter D represents.